Housing heating has always represented a problem for a person. The temperature is considered normal for health-18-20, for comfort they add 2-3.
If you want to buy polypropylene bags, then we advise you to follow the following link. On the site you can order polypropylene bags 70 120 at competitive prices. You can get more detailed information on the company’s website.
The moisture content of firewood should be no more than 35%so that moisture, when mixed with particles of soot, does not flow with black condensate. For indoor furnaces, it is supposed to use solid firewood, and for slabs – softer.
It is important to use the logs approximately the same in thickness, then the stove will heat up faster. The normal length for logs is a length of 50 cm, and 8 cm thick.
An important mistake is the desire to save the existing warmth in the house. For faster heating of the rooms you need to ventilate them, removing the musty air.
Before starting the firebox, the check is subjected to the grate. The ash that limits the flow of air to burning fuel is also removed, the ash is cleaned.
Particular attention is paid to coating the firebox with clay. Cold air will even suck into small cracks and reduce the heating of the furnace, will contribute to the formation of condensate. Even a two -mm crack around the perimeter of the valve frame into the furnace will lead to the fact that heat losses increase 10%.
The worst enemy is soot. Heating stoves on wood will warm well with good traction. When using raw firewood, the stove will begin to smoke. Smoke pipes and channels must be cleaned from soot every two months.
