The appearance of mold is always unpleasant. It worsens the appearance, can cause various diseases, including allergic. Therefore, information will become very important on how to get rid of mold on the walls. The article will describe several ways to remove mold, depending on the level of its distribution.
Many people guess (or remember from the school biology course) that we are not alone. A large number of different organisms are constantly living next to us. Some of them are useful to man, others are not very. One of the most popular satellites in some cases is mold. Many do not pay attention to her, but in vain. The mold is toxic, respectively, should be eliminated. But how to get rid of mold on the walls, given its increased survivability? There are a number of measures that become especially effective if they are used jointly.
First of all, it is necessary to determine the degree of infection. This will depend on how soon measures to eliminate mold have begun.
If the work is started in a timely manner, it is enough to carry out simple actions. First, the main infected layer should be removed, that is, scraping the mold from the surface. Work can be carried out by any sharp object: scraper, spatula, knife. After that, you need to prepare an antifungal solution. Often used chlorine solutions for disinfecting. However, you need to be careful with them. Firstly, they are toxic, and secondly, you need to choose the right solution. Flexive for one type of mold, it can be an excellent top dressing for another type. Also, antifungal solutions can be purchased in a store, it is much easier than cooking them yourself.
The situation becomes much more complicated when the mold managed to take root on the walls. For her, the previous method is ineffective, describing how to get rid of mold on the walls.
To eliminate an unwanted neighbor will have to carry out a set of work that does not differ from the repair. First you need to remove the layer of plaster on which the mold was formed, most likely to the base. After this, the base (concrete slab, brick, block, etc. D.) you need to clean. The surface is treated with antifungal agents, primer and waterproofing mixture. After that, the wall section is plastered and put off. Since such work is quite expensive and complex, it is better not to allow the total spread of mold.
However, all the measures described above are effective only for a certain period. Once the mold originally appeared, it means that there is an acceptable environment for it. If you do not get rid of the reasons, soon you can wait for silent, but stubborn roommates again. The first reason for the appearance of mold is poor ventilation. Together with high humidity, the absence of the sun and a temperature of +15 ° C, it creates comfortable conditions for the life of mold. Therefore, it is necessary to improve ventilation of the room, stably ventilating it or installing special ventilation systems. This will provide a good microclimate in the room and the lack of mold.